Michigan-based k-Space Associates, a worldwide supplier of a wide range of thin-film characterization tools, will be represented through its distributor R-DEC at the microelectronics trade-show and symposium Semicon Japan 2018, which will take place December 12-14 in Tokyo, Japan.

k-Space was founded in 1992 and has since become a leading manufacturer of metrology tools for the thin-film, semiconductor, and photovoltaic industries. Stop by at the R-DEC booth to learn about metrology tools, such as the kSA Emissometer, an ex situ tool that provides MOCVD fabs with essential wafer carrier characterization.

“The real advantage of the kSA Emissometer is that it provides fabs with systematic carrier data that can be integrated into their quality control processes. It also provides a go-no-go decision on carrier use and quantitative determination of the carrier emissivity, allowing for temperature set-point adjustments for individual carriers. In the end, this will lead to lower production costs and better device yields,” according to k-Space.

There are many reasons why your electronic products and electrical equipment pieces need to be tested through the EMC compliance process. When you decide to get the testing done, it is best to go with a reputable company for your EMC regulation testing, such as the one found at curtis-straus.com. Below are some of the common reasons to submit your electronics to the testing.

Regulation Requirements

Most industrial fields have agencies created which are responsible to help define and enforce EMC standards. When you have these standards being enforced, your products are not able to be sent to specific countries or regions until testing is completed.

Required By Customer

There are many reasons why your customers might want EMC testing completed. Some companies are required to have the testing completed before they can buy or sell products. If your product is a component of third-party products, the OEM customer may need to get proof that your part of the product passed the testing before purchasing.

Performance And Reliability

For some cases, you might want to get the testing done on your products to ensure reliability and performance. If you only plan to sell your products in the United States, the EMC testing will not always be required. However, if you want to ship to another country, it will need to pass some standard testing. Some companies want to establish their own set of immunity standards to ensure they have the highest customer satisfaction possible. The testing will be done to help minimize any possible field failures that could weaken the brand.

As you can see, there are many reasons why a company would need to submit their products through EMC testing. Depending on the type of product and the countries involved, the formal certification process might be necessary. There are fees involved with the testing and in some countries there will be additional costs for submitting as well. The fees will depend on the agency you use and the type of product needing to be tested. They could range from a few hundred to a few thousand dollars.

Experts from around the world will come to Shanghai, China, from September 2 to September 7 to attend the 20th International Conference on Molecular Beam Epitaxy, ICMBE. They will discuss recent advances in MBE techniques and exhibit innovative new devices.

Among the exhibitors is k-Space Associates, a leading manufacturer of in situ, in-line, and ex situ metrology tools for the semiconductor, thin-film, and photovoltaic industries. The kSA RateRat Pro, for example, is an advanced tool for thin-film deposition rate monitoring and is compatible with any type of deposition method, including MBE.

The highlight of ICMBE 2018 will be a presentation by the “Father of MBE,” Al Cho, on the historical development of the MBE technique.

When you lose someone you love very much, filing a lawsuit might be the last thing on your mind. After all, you are in a lot of pain and experience a great deal of suffering. This is what happens to those who suddenly find themselves in a situation they might have never been before: losing their loved one, which is very difficult to deal with. The clock is ticking though. There is a certain amount of time you have in order to file a lawsuit against those you suspect caused the death of your loved one. If the time runs out, you are barred forever from the possibility of filing a lawsuit. Because of this, hiring a Homestead Hospital accident lawyer as soon as possible is a smart move.

There seems to be a lot of confusion when it comes to the concept of damages you can collect as the result of the lawsuit. Here you will find a few types you are very likely to collect:

1. Medical bills. If your loved one died in a hospital, it happened due to some sort of treatment. It is very likely that your loved one spent some money on said treatment and you should be able to claim it back.

2. Burial expenses. All of the expenses related to the burial should be covered by the defending party.

3. Lost wages the deceased would have made. This is a large portion of the damages. If your loved one worked before they died, their death might put a huge toll on your finances. The judge should calculate how much your loved one would have made had he not died compared to his normal life expectancy.

4. Compensation for pain and suffering of the family of the deceased. It is true that it is difficult to out a price on suffering and pain, but there are certain ways in which a judge can calculate how much you should be compensated for that.

5. Punitive damages. This is something that only certain states allow, so don’t assume that punitive damages will happen in your case. Those damages are supposed to punish and prevent similar behavior that might happen in the future.

If you own and operate a car wash, you’re probably familiar with the struggle to get people to pull over. Maybe some of these advertising tips can help!

1. Make Bigger Signs

If people aren’t paying attention to your signs, have you considered the possibility that they can’t really see them? It might be perfectly legible to you, but it might be a small, colorful blur to passing motorists. Try making your signs bigger and see if your traffic improves.

2. Use More Color

Speaking of color, there’s a reason why gas stations and car washes are fond of the entire rainbow. It’s all about grabbing attention from potential customers even when they’re whizzing by at 60 miles per hour. Don’t try to be a subtle, sophisticated car wash; use what bright and gaudy hues are at your disposal.

3. Offer More Incentives

Do you have a lobby with vending machines and free wi-fi? Be sure to advertise this in your flyers and leaflets. Do you offer special discounts for students, seniors and veterans? Trumpet this fact on social media. Everyone loves getting a deal, so take advantage of that mindset.

4. Advertise Your Reconstructions

Maybe you want a bigger car wash. Maybe you want to extend your arches and tunnels so that you can accommodate jeeps and trucks as well as cars. Talk to car wash construction companies; then advertise your remodel every step of the way. Get people excited about what’s coming.

5. Saturate the Market

The great thing about complete car wash systems California is that you offer something everyone needs, so you can advertise to multiple demographics without worrying about crossovers or generation gaps. Who doesn’t love a buff, shiny car? Dangle that vision in front of their eyes until you’ve secured their business.

These are just a few ways to attract more customers to your car wash. There are many more, but let these suggestions serve as guidelines for further action. They can be your first attempts at fresh marketing, but they don’t have to be your last!

Casters are not something you can just go to the store and grab off the shelf without knowing what you are buying. There are many different types of casters. This means that you need to be an educated shopper before you start buying these items. Buying the wrong casters will result in a rather big headache for you. This is why you would be better off learning some of the basics about these items. This will allow you to know the exact type of casters that you require. Here are a few of the most crucial considerations you need to make prior to spending money on casters.

1. How much weight will you be depending on your new casters to carry on a daily basis?
Pallet jack wheels are usually required to support a great deal of weight. However, there are other varieties of casters that are much weaker and only designed to support things like a mail cart in an office. Therefore, you need to be very careful about the weight limit of any casters that you buy. You could have a very serious accident on your hands if you use casters that are not strong enough to carry the weight of your cargo. Every caster will say the weight it is designed to carry on its package. This is something you should definitely check out before making your purchase.

2. What is the average temperature going to be where the casters will be used?

Do you plan on using your casters in a factory that is extremely hot? If so, you need to find out what the temperature limitations are on the casters you are going to buy. Some casters can melt if you try to use them in places where it is too hot. Needless to say, a melted caster will not be of much use to you. Ask the company that made the casters how hot they are able to get before they begin to melt.

3. Do you need to buy casters with brakes?

There are many casters that include brakes that can be activated to prevent them from rolling down an incline. These can be very useful if you will be using your casters on ramps or surfaces that are not totally flat. Not all casters have brakes attached to them. So you might need to place a special order.

There are a number of ways to monetize content on a website, such as displaying ads and using affiliate links. Many publishers utilize several income streams, but most probably start with ads. After all, it�s very easy to sign up for ad programs and to embed ads in articles.

However, sites need a lot of traffic to generate significant income through ads. Embedding affiliate links is often a more profitable way, if you can reach an audience with products that match their interest. But instead of simply embedding these links in their site�s text content, publishers can also make use of video. Combining videos and affiliate links can often help them to even better monetize their content. Choosing the best website video player for this purpose is therefore a crucial decision.

The BOSS video player offers an easy-to-use back panel so that publishers can add information based on time codes. Having such a customizable video player at their disposal gives them full control and lets them experiment and test. The video player also looks more upscale, compared to embedding a free video player, which helps online publications to look more sophisticated, especially if the content is meant to reach an affluent audience.